| Productvorm | Kant-en-klaar gemengd |
|---|---|
| Geschikt voor gebruik binnen | |
| Geschikt voor buitengebruik | |
| Type finish | Semi-glans |
| Volume | 5 l |
| Dekking oppervlak | 16 m²/L |
| Kleurnaam | Pine |
| Samenstelling | Op basis van oplosmiddelen |
| Matheid | Doorschijnend |
| Aantal lagen (min) | 1 |
| Aantal lagen (max) | 2 |
| Aantal verfbeurten, noot | New/bare wood - 2 coats onto Cetol HLS Plus; Mainternance - 1 coat unless the surfaces are excessively weathered |
| Aanbevolen laagdikte (droog) | 22 µm |
| Droogtijd | 4 uur |
| Opnieuw lakken na | 16 uur |
| Inhoud vluchtige organische stoffen (VOS) | 400 g/l |
| Inhoudetiketteringsysteem voor vluchtige organische stoffen (VOS) | Hoog (25 - 50%) |
| Gereedschap reinigen | Clean brushes and equipment with a proprietary brush cleaner immediately after use. If spilled, Cetol THB Plus may be removed immediately while still wet, using white spirit |
| Gebruiksinstructie | Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Cetol THB Plus is supplied ready for use. Do not thin. Cetol HLS Plus should be used as a basestain for joinery items prior to co |
| Hoe te bewaren | Store in cool, dry, frost-free conditions |
| Oppervlaktevoorbereiding | Ensure the timber surface is suitably prepared, clean and dry, with dust, dirt, wax and grease removed, and allowed to acclimatise to its end-use environment. The moisture content should not exceed 18% prior to coating.Degrease any exposed bare timber sur |
| Breedte verpakking | 208 mm |
|---|---|
| Diepte verpakking | 180 mm |
| Hoogte verpakking | 243 mm |
| Aantal per verpakking | 1 stuk(s) |
|---|
| Lagen per pallet | 4 |
|---|---|
| Producten per palletlaag | 30 stuk(s) |
| Producten per pallet | 120 stuk(s) |
